Chapter 5. The User Interface
77
RGB
Drag the slider bars to adjust the RGB (Red, Green, Blue) values.
When a RGB value is increased, the RGB component of the image is
correspondingly increased.
If you enable
Set to Grayscale
, the remote video display is changed
to grayscale.
Clicking the
Reset
button brings the RGB settings back their default
values.
Gamma
This section allows you to adjust the video display's gamma level.
This function is discussed in detail in the next section,
Gamma
Adjustment
.
Performance
Use the slide bar to select the type of internet connection that the
local client computer uses. The switch will use that selection to
automatically adjust the
Video Quality
and
Detect Tolerance
settings
to optimize the quality of the video display.
Since network conditions vary, if none of the pre-set choices seem to
work well, you can select
Advanced
and use the Video Quality and
Detect Tolerance slider bars to adjust the settings to suit your
conditions.
Video Quality
Drag the slider bar to adjust the overall Video Quality. The larger the
value, the clearer the picture and the more video data goes through
the network. Depending on the network bandwidth, a high value may
adversely effect response time.
Enable Refresh The KVM Over the NET™ switch can redraw the screen every 1 to 99
seconds, eliminating unwanted artifacts from the screen. Select
Enable Refresh
and enter a number from 1 through 99. The KVM
Over the NET™ switch will redraw the screen at the interval you
specify. This feature is disabled by default. Click to put a check mark
in the box next to
Enable Refresh
to enable this feature.
Note:
1. The switch starts counting the time interval when mouse
movement stops.
2. Enabling this feature increases the volume of video data
transmitted over the network. The lower the number
specified, the more often the video data is transmitted.
Setting too low a value may adversely affect overall
operating responsiveness.
Transparency
Adjusts the transparency of the toolbar that comes up when the GUI
hotkey ([Scroll Lock][Scroll Lock], for example), is invoked. Slide the
bar until the display in the example window is to your liking.
Color Depth
Control
This setting determines the richness of the video display by adjusting
the amount of color information.
Options
Usage
Summary of Contents for KN2116v
