manualshive.com logo in svg

ATEN KN2116v, User Manual

Share
Download
ATEN KN2116v User Manual Download Page 198

KVM Over the NET™ User Manual

180

Filter

Š

IP and MAC Filtering
IP and MAC Filters control access to the KVM Over the NET™ switch 
based on the IP and/or MAC addresses of the client computers attempting 
to connect. A maximum of 100 IP filters and 100 MAC filters are allowed. 
If any filters have been configured, they appear in the IP Filter and/or 
MAC Filter list boxes.

To enable IP and/or MAC filtering, 

Click

 to put a check mark in the 

IP 

Filter Enable

 and/or 

MAC Filter Enable

 checkbox.

Š

If the include button is checked, all the addresses within the filter range 
are allowed access; all other addresses are denied access.

Š

If the exclude button is checked, all the addresses within the filter 
range are denied access; all other addresses are allowed access.

Summary of Contents for KN2116v





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands