manualshive.com logo in svg

ATEN KN2116v, User Manual

Share
Download
ATEN KN2116v User Manual Download Page 43

 Chapter 2. Hardware Setup

25

Single Stage Installation

In a single stage installation, there are no additional switches are cascaded from 
the original switch. To set up a single stage installation, refer to the installation 
diagrams starting on page 27 (the numbers in the diagram correspond with the 
numbers of the instruction steps), and do the following:

1. For the KN2124v, KN2140v, KN4124v or KN4140v, use the 5-in-1 

Console Cable supplied with the package to connect your Local Console 
devices to the unit. (See

KN2124v / KN2140v / KN4124v / KN4140v Single 

Stage Installation Diagram

, page 27.)

For the KN2116v, KN2132v, KN4116v, and KN4132v plug your Local 
Console’s keyboard, monitor, and mouse into the unit’s Console Ports. 
Each port is color coded and marked with an appropriate icon. 
(See

KN2116v / KN2132v / KN4116v / KN4132v Single Stage Installation 

Diagram

, page 28)

For the KN2116

A

, KN2132, KN4116, and KN4132, plug your Local 

Console’s keyboard, monitor, and mouse into the unit’s Console Ports. 
Each port is color coded and marked with an appropriate icon. 
(See

KN2116A / KN2132 / KN4116 / KN4132 Single Stage Installation 

Diagram

, page 29)

Note:

1. You can use any combination of keyboard and mouse 

connections. For example, you can use a PS/2 keyboard with a 
USB mouse.

2. USB keyboards and mice can plug into the USB ports on the front 

panel, as well as into the ports in the console port section.

3. The KVM Over the NET™ switch does not support distances that 

exceed 20m between itself and the local monitor.

2. Use Cat 5e cable to connect any available KVM port to a KVM Adapter 

Cable that is appropriate for the server you are installing (see the table on 
page 10 for details).

Note:

1. If you are using a KA7120, KA7130, KA9120, KA9130, or 

KA9131 Adapter Cable, refer to page 278 for mouse pointer 
synchronization information.

2. If you are using a KA9131 Adapter Cable, refer to page 259 for 

video and mouse adjustment information.

Summary of Contents for KN2116v





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands