ATEN KN2116v User Manual Download Page 24 | Manualshive

Page: 24 / 316

ATEN KN2116v User Manual Download Page 24

KVM Over the NET™ User Manual

6

Port Share Mode allows multiple users to gain access to a server
simultaneously

Integration with ALTUSEN CC2000 Management software

Power Association enables the switch’s KVM ports to be associated with a
PDU’s power outlets for remote power management of the servers from
the switch’s interface

Manage browser access (Browser, http, https)

IPv6 capable

PadClient provides instant, convenient, and secure remote access to
control servers through your iPad. Available free from the Apple store.

Note:

PadClient works on iOS 7 (and above) with ATEN KN2 and KN4 series
KVM switches running on firmware 1.7.162 (and above).

Easy-to-Use Interface

Local Console, browser based, and AP GUIs offer a unified multi-
language interface to minimize the user training time and increase
productivity

Multiplatform client support (Windows, Mac OS X, Linux, Sun)

Multi-browser support: Internet Explorer, Chrome, Firefox, Safari, Opera,
Mozilla, Netscape

Browser-based UI in pure Web technology allows administrators to
perform administrative tasks without pre-installed Java software package
required

User can launch multiple Virtual Remote Desktop to control multiple
connected servers from the same login session

Magic Panel

Full-screen or sizable and scalable Virtual Remote Desktop

Panel Array Mode available to both local console operators and remote
access users

Keyboard/Mouse Broadcast – keyboard and mouse inputs can be
duplicated on all the attached servers

Video syncing with the local console – local console monitor’s EDID
information stored on the KVM Adapter Cables for display resolution
optimization

«
...
22
23
24
25
26
...
»

Summary of Contents for KN2116v





























































































































































































































































































































Reviews:

No comments