manualshive.com logo in svg

ATEN KN2116v, User Manual

Share
Download
ATEN KN2116v User Manual Download Page 225

 Chapter 10. Maintenance

207

Display Information

The 

Display Information

 button will query and show the locally connected 

monitor’s EDID information, as shown here:

Update Adapter Display Info

The 

Update Adapter Display Info

 button will query the local monitor’s EDID 

information and update it on the Adapter Cable. The EDID information tells 
the server's video card about the hardware of the display it is connected to; in 
this case the monitor connected to the KVM console.

Use the 

Display Information 

button to obtain the local monitor’s Preferred 

Resolution (optional), and apply it with the 

Select Preferred Resolution 

drop 

down menu, then click 

Write

. If the local console is not connected to a 

monitor, the default EDID setting is loaded on the adapter cable.

Summary of Contents for KN2116v





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands