ATEN KN2116v User Manual Download Page 107

Page: 107 / 316

Chapter 5. The User Interface

Power Over the Net™

The Power Over the Net™ icon provides the ability to power on,
power off, and reboot outlets associated with the port on the PON

device (see

Power Management

, page 134 for details) from the control panel.

Click this icon to select from the available choices:

After clicking on the PON icon, a list of the power outlets associated with the
connected port appears with the available options:

Options

Usage

On=>Off

Sends a Power Off signal to the selected outlet.

On=>Reboot

Sends a Reboot signal to the selected outlet.

Off=>On

Sends a Power On signal to the selected outlet.

All

Sends the selected signal (

Off

Reboot

) to all associated

outlets.

Pending

A signal has been sent to the outlet and is in the process of
performing the action.

Summary of Contents for KN2116v





























































































































































































































































































































Search results

Summary of Contents for KN2116v

Reviews:

ATEN KN2116v, User Manual, Page: 107 / 316

Search results

Summary of Contents for KN2116v

Reviews: