ATEN KN2116v, User Manual

Page: 156 / 316

KVM Over the NET™ User Manual
138
3. Configure the outlet according to the information provided in the
following table:
Note: If there is a conflict between the day set in the Period panel and
the time the operation is supposed to start, a message will appear
informing you of the problem. Click the
Date/Time button and
reset the time and date.
4. When you have finished making your configuration settings, click
Save .
5. Repeat the above steps to set up additional schedules.
Š To modify a schedule, select it in the main panel, then click Modify .
The Outlet Schedule dialog box comes up – make your changes, then
click Save .
Š To delete a schedule, select it in the main panel, then click Remove .
Š To run all power operations listed in the Outlet Schedule dialog box
now – without waiting for the scheduled time to arrive – click Run .
Š To stop all power operations listed in the Outlet Schedule dialog box,
click Stop .
Š
Synchronization
If more than one outlet has been selected for association with a port,
Synchronization can be used to standardize their configurations.
Enabling Synchronization (by checking the checkbox), brings up the
Pon Outlet Configuration dialog box (see Configuration , page 135).
The settings that you make are applied to all the outlets associated with
the port so that their settings are all the same, and all the outlets
associated with the port have the same schedule configuration as the
first PON outlet.
Field Explanation
Schedule Name Provide a name to identify the scheduled operation by.
Operation
Mode Select the type of power operation you want to occur at the
scheduled time.
Period Select the time period that the scheduled operation will occur
at: Once; Weekdays; or Daily – then drop down the list to
select which day the operation is to start on.
Time Click the Date/Time button to select the time and date the
operation is to start on.