Asus Z97-WS User Manual Download Page 8

Page: 8 / 186

viii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

DANGER/WARNING:

Information to prevent injury to yourself when trying to

complete a task.

CAUTION:

Information to prevent damage to the components when trying to

complete a task

IMPORTANT:

Instructions that you MUST follow to complete a task.

NOTE:

Tips and additional information to help you complete a task.

Typography

Bold text

Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key>

Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 8 / 186

Search results

Summary of Contents for Z97-WS

Reviews: