Asus Z97-WS User Manual Download Page 32

Page: 32 / 186

1-16

Chapter 1: Product introduction

Chapter 1

EPU switch

Enable this switch to automatically detect the current PC loadings and intelligently

moderate the power consumption.

Enable this switch when the system is powered off.

•

The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is

enabled. Refer to section

1.2.8 Onboard LEDs

for the exact location of the EPU LED.

•

If you enable this switch under Windows

OS environment, the EPU function will be

activated after the next system bootup.

•

You may change the EPU settings in the software application or BIOS setup program

and enable the EPU function at the same time. However, the system will use the last

setting you have made.

Z97-WS

Z97-WS EPU switch

Disable

(Default)

Enable

EPU

Clear CMOS button (CLR_CMOS)

Press this button to clear the BIOS setup information only when the systems hangs

due to overclocking.

Z97-WS

Z97-WS CLR_CMOS button

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 32 / 186

Search results

Summary of Contents for Z97-WS

Reviews: