Asus Z97-WS User Manual Download Page 178

Page: 178 / 186

6-10

Chapter 6: Multiple GPU support

Chapter 6

6.2.6

Enabling the NVIDIA

SLI™ technology

After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA

Control Panel under the Windows

7 operating system.

Launching the NVIDIA Control Panel

You can launch the NVIDIA Control Panel by the following two methods.

Right click on the empty space of the Windows

desktop and select

NVIDIA Control

Panel

The NVIDIA Control Panel window appears (See Step

B3).

B1. If you cannot see the NVIDIA Control Panel item in step

(A), select

Screen Resolution

6.2.5

Installing the device drivers

Refer to the documentation that came with your graphics card package to install the device

drivers.

Ensure that your PCI Express graphics card driver supports the NVIDIA

SLI™ technology.

Download the latest driver from the NVIDIA website (www.nvidia.com).

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 178 / 186

Search results

Summary of Contents for Z97-WS

Reviews: