manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 44 / 186

Share
Download
Asus Z97-WS User Manual Download Page 44

1-28

Chapter 1: Product introduction

Chapter 1

4. 

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports 

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel 

audio I/O module cable to this connector.

• 

We recommend that you connect a high-definition front panel audio module to this 

connector to avail of the motherboard’s high-definition audio capability.

• 

If you want to connect a high-definition or an AC’97 front panel audio module to this 

connector, set the Front Panel Type item in the BIOS setup to 

[HD Audio]

 or 

[AC97]

.

5. 

T_Sensor connector (2-pin T_SENSOR1)

This connector is for the thermistor cable that allows you to monitor the temperature of 

your motherboard’s critical components and connected devices.

Z97-WS

Z97-WS Analog front panel connector

AAFP

GND PRESENCE# SENSE1_RETUR

SENSE2_RETUR

PORT1 L PORT1 R PORT2 R

SENSE_SEND

PORT2 L

HD-audio-compliant

pin definition

PIN 1

PIN 1

AGND NC NC

NC

MIC2

MICPWR

Line out_R

NC

Line out_L

Legacy AC’97

compliant definition

Z97-WS

Z97-WS T_SENSOR connector

PIN 1

T_SENSOR1

SENSOR IN

GND

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments