Asus Z97-WS User Manual Download Page 144

Page: 144 / 186

4-6

Chapter 4: Software support

Chapter 4

AI Suite 3 main menu bar

System

Information

USB 3.0 Boost

EZ Update

USB

USB BIOS

Flashback

Dual Intelligent

Processors 5

AI Suite 3 Main menu

The AI Suite 3 main menu gives you easy-access controls and insight to what’s going on

with your computer - allowing you to optimize performance settings while at the same time

ensuring system stability.
The AI Suite main menu includes is a quick-access menu bar that allows you to swiftly launch

any of the integrated ASUS utilities. Click or tap

on the top-right corner of the menu to

launch the menu bar.

The Ai Suite 3 screenshots in this section are for reference only and can vary depending on

motherboard model.

•

Some functions in the AI Suite 3 main menu in this user guide may vary depending on

the motherboard model.

• Refer to the software manual in the support DVD or visit the ASUS website at

www.asus.com for detailed software configuration.

Click or tap to launch AI Suite 3 menu bar

Push Notice

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 144 / 186

Search results

Summary of Contents for Z97-WS

Reviews: