Asus Z97-WS User Manual Download Page 143

Page: 143 / 186

Z97-WS

4-5

Chapter 4

Launching AI Suite 3

Windows

7 OS

From the Desktop, click or tap

Start > All Programs > ASUS > AI Suite 3 > AI Suite 3

You can also launch AI Suite in Windows

7 by clicking or tapping

on the Notification

area.

Windows

8 and Windows

8.1 OS

To launch AI Suite 3 in Windows

8 or Windows

8.1, tap the AI Suite 3

app on the Start Screen (or if you’re using a mouse, click or tap the AI

Suite 3 app on the Start Screen).

Windows

8 and Windows

8.1 OS

Place the Support DVD into the optical drive then follow onscreen instructions.

From the

ASUS motherboard support DVD

main menu, select the Utilities tab and

click or tap

AI Suite 3

3. Follow the succeeding onscreen instructions.

If the

ASUS motherboard support DVD

main menu did not appear, try the following:

a. Go to the

Start Screen

then click or tap the

Desktop

app.

b. On the lower left corner of the Desktop, click or tap

File Explorer

then

select your DVD drive and tap or double-click or tap the

Setup

application.

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 143 / 186

Search results

Summary of Contents for Z97-WS

Reviews: