manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 165 / 186

Share
Download
Asus Z97-WS User Manual Download Page 165

Z97-WS

5-5

Chapter 5

5. 

Use the up/down arrow key to select a drive, and then press <Space> to select. A 

small triangle marks the selected drive. Press <Enter> after completing your selection.

6. 

Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 

and 5 only),then press <Enter>. The available stripe size values range from 4 KB to 

128 KB. The following are typical values:

- 

RAID 0: 128 KB

- 

RAID 10: 64 KB

- 

RAID 5: 64 KB

We recommend a lower stripe size for server systems, and a higher stripe size for 

multimedia computer systems used mainly for audio and video editing.

7. 

When the 

Capacity

 item is selected, enter the RAID volume capacity that you want 

and press <Enter>. The default value indicates the maximum allowed capacity.

8. 

When the 

Create Volume

 item is selected, press <Enter>. The following warning 

message appears:

9. 

Press <Y> to create the RAID volume and return to the main menu, or <N> to go back 

to the 

CREATE VOLUME

 menu.

WARNING:  ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N)

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments