manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 116 / 186

Share
Download
Asus Z97-WS User Manual Download Page 116

3-44

Chapter 3: BIOS setup

Chapter 3

Intel LAN Controller (LAN1-LAN2) [Enabled]

This item allows you to enable or disable the Intel LAN1/2 controllers.
Configuration options: [Disabled] [Enabled]

The following item appears only when you set the Intel LAN Controller

 

to 

[Enabled]

.

Intel PXE OPROM (LAN1-LAN2) [Disabled]

This item allows you to enable or disable the PXE OptionRom of the Intel

®

 LAN 

controller.
Configuration options: [Enabled] [Disabled]

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.

Serial Port [Enabled]

Allows you to enable or disable the serial port (COM).Configuration options: [Enabled] 

[Disabled]

Change Settings [IO=3F8h; IRQ=4]

This item appears only when you set the 

Serial Port

 to [Enabled] and allows you 

to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] 

[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]

3.6.8 

APM Configuration

ErP Ready [Disabled]

This item allows you to switch off some power at S4+S5 or S5 to get the system ready for 

ErP requirement. When set to 

[Enabled]

, all other PME options are switched off.

Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments