manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 184 / 186

Share
Download
Asus Z97-WS User Manual Download Page 184

A-4

Appendices

Ap

pendices

Bluetooth Industry Canada Statement

This Class B device meets all requirements of the Canadian interference-causing equipment 

regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le 

matériel brouilleur du Canada. 

NCC: Taiwan Wireless Statement

Japan RF Equipment Statement

KC (RF Equipment)

Google™ License Terms

Copyright© 2014 Google Inc. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file 

except in compliance with the License. You may obtain a copy of the License at:
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the 

License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF 

ANY KIND, either express or implied.

See the License for the specific language governing permissions and limitations under the 

License.

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments