Asus Z97-WS User Manual Download Page 146

Page: 146 / 186

4-8

Chapter 4: Software support

Chapter 4

4.4.2

USB 3.0 Boost

USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically

speeds up the transfer rates of your USB storage devices.

Launching USB 3.0 Boost

To launch USB 3.0 Boost, click or tap

on the top-right corner of the AI Suite 3 main

menu, then select

USB 3.0 Boost

Using the USB 3.0 Boost

•

USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a

list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com.

•

The data transfer speed varies with USB devices. For a higher data transfer

performance, use a USB 3.0 device.

Click or tap to select a USB device

Click or tap to enable the USB

device’s normal data transfer rate

Click or tap to enable UASP or

Turbo Mode for a faster data

transfer rate

Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost.

Refer to section

2.3.1 Rear I/O connection

of your user guide for more details.

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 146 / 186

Search results

Summary of Contents for Z97-WS

Reviews: