manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 73 / 186

Share
Download
Asus Z97-WS User Manual Download Page 73

Z97-WS

3-1

Chapter 3

The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI 

architecture, offering a user-friendly interface that goes beyond the traditional keyboard-

only BIOS  controls to enable a more flexible and convenient mouse input. You can easily 

navigate the new UEFI BIOS with the same smoothness as your operating system. The 

term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS (Basic Input and Output System) stores system hardware settings such as storage 

device configuration, overclocking settings, advanced power management, and boot 

device configuration that are needed for system startup in the motherboard CMOS. In 

normal circumstances, the default BIOS settings apply to most conditions to ensure 

optimal performance. 

DO NOT change the default BIOS settings

 except in the following 

circumstances: 

• 

An error message appears on the screen during the system bootup and requests you 

to run the BIOS Setup.

• 

You have installed a new system component that requires further BIOS settings or 

update.

Inappropriate BIOS settings may result to instability or boot failure. 

We strongly 

recommend that you change the BIOS settings only with the help of a trained service 
personnel

.

When downloading or updating the BIOS file, rename it as 

Z97WS.CAP

 for this 

motherboard.

BIOS setup

3

3.1 

Knowing BIOS

Chapter 3: 

BIOS setup

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments