manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 171 / 186

Share
Download
Asus Z97-WS User Manual Download Page 171

Z97-WS

6-3

Chapter 6

5.   Connect two independent auxiliary 

power sources from the power supply 

to the two graphics cards separately.

6. 

Connect a VGA or a DVI cable to the 

graphics card.

6.1.4 

Installing three CrossFireX™ graphics cards

1. 

Prepare three CrossFireX-ready graphics cards. 

2. 

Insert the three graphics card into the PCIEX16 slots. If your motherboard has more 

than three PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the 

PCIEX16 slots recommended for multi-graphics card installation.

3. 

Ensure that the cards are properly seated on the slots.

4. 

Align and firmly insert the two 

CrossFireX bridge connectors to the 

goldfingers on each graphics card. 

Ensure that the connectors are firmly 

in place.

5.   Connect three independent auxiliary 

power sources from the power supply 

to the three graphics cards separately.

6. 

Connect a VGA or a DVI cable to the 

graphics card.

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments