manualshive.com logo in svg

Asus Z97-WS, User Manual, Page: 114 / 186

Share
Download
Asus Z97-WS User Manual Download Page 114

3-42

Chapter 3: BIOS setup

Chapter 3

3.6.7 

Onboard Devices Configuration

Scroll down to view the other BIOS items.

HD Audio Controller [Enabled]

This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]

The following items appear only when you set the HD Audio Controller

 

to 

[Enabled]

.

Front Panel Type [HD Audio]

This item allows you to set the front panel audio connector (AAFP) mode to legacy 

AC’97 or high-definition audio depending on the audio standard that the front panel 

audio module supports.
[HD Audio] 

Sets the front panel audio connector (AAFP) mode to high definition 

audio.

[AC97] 

Sets the front panel audio connector (AAFP) mode to legacy AC’97

SPDIF Out Type [SPDIF]

[SPDIF] 

Sets to an SPDIF audio output.

[HDMI] 

Sets to an HDMI audio output.

Summary of Contents for Z97-WS



























































































































































































Reviews:

No comments