Asus Z97-WS User Manual Download Page 51

Page: 51 / 186

Z97-WS

1-35

Chapter 1

13. DirectKey connector (2-pin DRCT)

This connector is for the chassis-mounted button that supports the DirectKey function.

Connect the button cable that supports DirectKey, from the chassis to this connector on

the motherboard.

Ensure that your chassis comes with the extra button cable that supports the DirectKey

feature. Refer to the technical documentation that came with the chassis for details.

Z97-WS

Z97-WS CPU_OV setting

PIN 1

DRCT

DRCT GND

14. Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt

Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

Z97-WS

Z97-WS TB_HEADER connector

TB_HEADER

GND

Plafform Sequence Control Plafform Sequence Control

Plug_Event

Power

Summary of Contents for Z97-WS



























































































































































































Search results

Summary of Contents for Z97-WS

Reviews:

Asus Z97-WS, User Manual, Page: 51 / 186

Search results

Summary of Contents for Z97-WS

Reviews: