Asus RS300-H8-PS12 User Manual Download Page 185

Page: 185 / 192

ASUS RS300-H8-PS12

7-37

7.8

Installing the Broadcom 10G driver

This section provides instructions on how to install the

Broadcom 10G

driver on the

system. You have to manually locate the driver for the Broadcom 10G in the support DVD
provided.
To install the

Broadcom 10G

driver:

Restart the computer.

Log on with

Administrator

privileges.

Insert the motherboard/system support DVD into the optical drive.

From the

Broadcom NetXtreme II

Driver Installer

window, click

Next.

Click the

Broadcom NetXtreme II

GigE Driver

to begin installation.

From the

License Agreement

window,

select

I accept the terms in the

license agreement

then click

Next.

Summary of Contents for RS300-H8-PS12

































































































































































































Search results

Summary of Contents for RS300-H8-PS12

Reviews:

Related manuals for RS300-H8-PS12

Brands by name

Popular brands

Asus RS300-H8-PS12, User Manual

Search results

Summary of Contents for RS300-H8-PS12

Reviews:

Related manuals for RS300-H8-PS12

Brands by name

Popular brands