manualshive.com logo in svg

Asus RS300-H8-PS12, User Manual

Share
Download
Asus RS300-H8-PS12 User Manual Download Page 128

6-18

Chapter 6: RAID configuration

6.4 

LSI Corporation MPT Setup Utility

The LSI Corporation MPT Setup Utility is an integrated RAID solution that allows you to 
create the following RAID sets from SAS hard disk drives supported by the LSI SAS 2308 
Series controller: RAID 0, RAID 1, RAID 1E, and RAID 10.

• 

You may use disks of different sizes in one volume; however, the size of the smallest 
disk determines the “logical” size of each member disk.

• 

DO NOT combine Serial ATA and SAS disk drives in one volume.

• 

The RAID setup screens shown in this section are for reference only and may not 
exactly match the items on your screen due to the controller version difference.

• 

The adapter name shown on the setup screens differs according to the installed SAS 
RAID card.

• 

Before requesting support from the ASUS Technical Support team, you have to take 
note of the MPTFW and MPTBIOS version for the SAS RAID card. After entering the 
SAS configuration utility, yaou can see below screen and identify the MPTFW and 
MPTBIOS version: 
MPTFW version: 5.00.00.00-IR 
MPTBIOS version: v7.29.00.00 (2012.11.12)

Esc = Exit Menu        F1/Shift+1 = Help 

Alt+N = Global Properties   -/+ = Alter Boot Order   Ins/Del = Alter 

Boot List

LSI  Corp  Config  Utility                        v7.29.00.00  (2012.11.12) 

Adapter List

  Global Properties

Adapter             PCI   PCI   PCI   PCI    FW Revision       Status        Boot 

                    BUS   Dev   Fnc   Slot                                Order

 

Asus SAS2308-2

        

04    00    00    07     5.00.00.00-IR     Enabled

       

0

 

Summary of Contents for RS300-H8-PS12

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands