manualshive.com logo in svg

Asus RS300-H8-PS12, User Manual

Share
Download
Asus RS300-H8-PS12 User Manual Download Page 118

6-8

Chapter 6: RAID configuration

6.2.3 

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID 
volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1. 

From the utility main menu, select 

3. Reset Disks to Non-RAID

 and press <Enter>. 

2. 

Press the up/down arrow keys to select the drive(s) or disks of the RAID set you want to 
reset, then press <Space>. A small triangle before the Port number marks the selected 
drive. Press <Enter> when you are done.

3. 

Press <Y> in the confirmation window to reset the drive(s) or press <N> to return to the 
utility main menu. 

Port  Drive Model   Serial #             Size        Status

0     ST3300656SS   HWAS0000991753TR    279.3GB

Member Disk

1     ST3300656SS   37VN00009846RAJ1    279.3GB      Member Disk

Select the disks that should be reset.

Resetting RAID disk will remove its RAID structures

and revert it to a non-RAID disk.

[  ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

[

RESET RAID DATA

]

WARNING: Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Summary of Contents for RS300-H8-PS12

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands