manualshive.com logo in svg

Asus RS300-H8-PS12, User Manual

Share
Download
Asus RS300-H8-PS12 User Manual Download Page 61

ASUS RS300-H8-PS12

4-13

6. 

CPU, front, and rear fan connectors  

 

(4-pin CPU_FAN1, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, REAR_FAN1)

The fan connectors support cooling fans. Connect the fan cables to the fan connectors 
on the motherboard, ensuring that the black wire of each cable matches the ground pin 
of the connector.

• 

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside 
the system may damage the motherboard components.

• 

These are not jumpers! DO NOT place jumper caps on the fan connectors!

• 

All fans feature the ASUS Smart Fan technology.

7. 

Serial port connectors (10-1 pin COM1)

These connectors are for the serial COM ports. Connect the serial port module cable 
to one of these connectors, then install the module to a slot opening at the back of the 
system chassis.

Summary of Contents for RS300-H8-PS12

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands