Asus RS300-H8-PS12 User Manual Download Page 183

Page: 183 / 192

ASUS RS300-H8-PS12

7-35

To install the

Intel

I210 Gigabit Adapter

driver on Windows

Server 2012:

Restart the computer.

Log on with

Administrator

privileges.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click

Intel

I210 Gigabit Adapter Driver

in the

Drivers

menu of the main screen to start

the installation.

Click

Next

to continue.

From the

Program Maintenance

window,

select

Modify

then click

Next.

Select the options you want to install then
click

Next

to continue.

Summary of Contents for RS300-H8-PS12

































































































































































































Search results

Summary of Contents for RS300-H8-PS12

Reviews:

Related manuals for RS300-H8-PS12

Brands by name

Popular brands

Asus RS300-H8-PS12, User Manual

Search results

Summary of Contents for RS300-H8-PS12

Reviews:

Related manuals for RS300-H8-PS12

Brands by name

Popular brands