Designing and Printing Labels
QL-120 User Guide
68
6.
Receive the printed labels.
Note: Do not pull the printed labels in any direction as they exit the printer. Pulling the
labels may result in a media jam.
Managing Media Out with QL-120 Series Printers
On media out, the printer will reprint labels to ensure all labels have been printed. This action
produces duplicate labels and the user will need a manual procedure to remove the duplicates,
especially if the labels contain information such as barcodes, serial numbers, etc.
When the printer runs out of media before completing the print job, it will print all remaining
labels including the unfinished, in-progress label when a new roll of labels is loaded in the
printer.
For example, during a print job of 10 labels, the printer runs out of media while printing the 6th
label and the 4th label does not reach the stop position. When media is loaded and printing
resumes, printing will start with the 4th label and continue to the 10th label in the job.
A label is considered printed if it exited the printer and passed the stop position. All labels that
did not pass the stop position prior to the media out condition will be reprinted.
Changing or Replacing Media
Removing a Media Roll
When changing media before completion of printing, use media of the same size as the media
used so far. Using media of a different size can result in an error.
1.
Open the roll cover.
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
