RW-5.1 Rewinder
QL-120 User Guide
151
4.
Fasten the R-U bracket to the R bracket using the supplied thumb nuts. Ensure the
threaded pin is centered in the adjustment slot.
Note: These thumb nuts may need to be loosened at a later time when aligning labels
during rewinding.
5.
Fasten the RW-5.1 rewinder to the R-U bracket using the supplied thumb screws.
Note: These thumb screws may need to be loosened at a later time when aligning labels
during rewinding.
6.
Launch the QL-120 Maintenance Utility.
From the Windows Start Menu, choose
Start > All Programs > QuickLabel QL-120 >
QL-120 Maintenance Utility
. A language and printer prompt will open.
Select a display language and the QL-120 series printer you want to connect to. Choose
OK
.
7.
Choose the
Cleaning
tab. Then choose the
Moving
button. This utility will prepare the
printer for lifting and moving onto the brackets.
8.
Holding the handles at the bottom of the printer, lift the printer and then place it on the
connected R and U brackets. Lift from the illustrated points. Do not hold the front side of
the printer. Ensure the printer remains level as you move it.
Note: The printer weighs about 53 pounds (24 kilograms). Two persons are required to
lift the printer. Two persons standing at the front and back of the printer respectively must
lift the printer by holding it with their hands under the bottom handles (two at the front,
one at the left, and one at the right). Attempting to lift the printer in an improper position
can result in the printer falling or injury.
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
