Getting Started
QL-120 User Guide
12
Before Installing the Printer
Before installing the printer, select an appropriate location, review the installation precautions,
and make sure that the system requirements are met.
Choosing an Installation Location
The installation environment must be as described in this section.
•
The printer power cord must be able to connect to an outlet (100V - 240V AC
+10%/-15%). This outlet must be easily accessible.
•
Avoid installing the printer near a faucet, water heater, humidifier, or refrigerator.
•
Ensure the environment temperature is within 59 to 86 degrees Fahrenheit (15 to 30
degrees Celsius).
•
Ensure the environment humidity is within 10% to 80% relative humidity.
•
Avoid placing the printer in areas exposed to high temperature and humidity, extremely
low temperature, severe temperature changes, or direct sunlight. Especially, avoid
placing the printer near fire, outdoors, in distribution warehouses, or in refrigerated areas.
•
Avoid installing the printer in areas subject to dust.
•
The room must be properly ventilated.
•
No printer feet should float. The printer must be held level constantly.
•
When placing the printer on a desk, table, or other similar surface, it must be sturdy and
stable enough to support the weight of the printer.
•
The minimum space required for installation and maintenance is shown below.
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
