Safety Warnings and Precautions
QL-120 User Guide
165
Power Supply and Power Cord
Warning
•
To avoid causing a fire or serious electrical shock, always use the power cord provided
with this printer. To avoid a fire or electrical shock, do not use an extension cord.
•
To avoid a fire or serious electrical shock, connect the printer power cord to an indepen-
dent power source that is not shared by other equipment or appliances.
•
To avoid causing a fire or serious electrical shock, make sure that the power plug is
securely and completely inserted into the power source.
•
Do not cut, damage, or otherwise alter the power cord. To avoid the dangers of fire and
electrical shock, never place a heavy object on the power cord, never expose it to heat,
and never pull on the cord to disconnect it. If the power cord is damaged in any way
(condensation on exposed wires, broken wires, etc.) contact the dealer where you
purchased the printer or the nearest service center for a replacement.
•
To avoid personal injury from an electrical shock, never handle the power cord or plug
when your hands are wet.
•
To avoid a fire or serious electrical shock, never knot the power cord or wrap it around
itself.
•
Disconnect the printer power cord during severe electrical storms. Lightning could cause
a fire or severe electrical shock or damage to the printer.
•
To avoid a fire hazard, occasionally disconnect the power cord from the printer and the
power supply and use a soft dry cloth to clean the cord connectors and the connection
points. Leaving the cord plugged in and not cleaned for a long period, especially in an
area subject to dust, oil, and high humidity, could cause the insulation material to deteri-
orate.
Caution
•
Be sure to turn off the printer before removing the power plug from the outlet.
•
Check the power plug and cord for any problem (abnormal heat, rust, bend, cracks,
scratches, etc.) at least once a month.
•
If any problem with the power plug or cord is found, replace it. Using it without replace-
ment can result in a fire or electrical shock hazard.
•
To avoid damaging the power plug, which could cause a short circuit and cause a fire or
electrical shock, never pull on the power cord to unplug the cord from the power supply.
Always grip the plug to remove it from the power supply.
•
If the printer will not be used for a long period, for your safety disconnect the power cord
from the power source.
•
Always keep the area around the power plug free of obstacles so you can unplug it easily.
This allows you to unplug the power cord quickly in an emergency.
•
Never use any power source other than the one rated for the printer. This printer is
designed to be used in the region where purchased. Also, make sure the power source
can supply sufficient power for the printer. This could cause a fire or serious electrical
shock, or damage the printer.
Supply voltage: AC 220 - 240 V or AC 100 - 120 V, 50/60 Hz
Power consumption: 440W (max), sleep mode 10W
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
