Safety Warnings and Precautions
QL-120 User Guide
167
performed properly, resulting in a machine failure or ink leakage which can soil your
clothes and the surrounding area.
•
Do not apply excessive force or strong shock to the upper unit. Doing so can result in a
machine failure or impair printer quality. Be sure to open/close the upper unit slowly.
•
Do not place the printer close to TV, radio receiver or loudspeakers, etc. The magnetic
field produced may cause the printer to malfunction, or the printer may interfere with
TV/radio reception.
•
Printed labels and ink can discolor due to ultraviolet rays and ozone.
Moving the Printer
Warning
•
Call the dealer for advice before you ship the printer a long distance or move the printer
by car or truck where it may be subjected to shock and vibration. Moving the printer
without the proper preparation could subject it to shocks and vibrations which could
damage the printer and cause a fire.
Caution
•
Before moving the printer, use the appropriate procedures to drain ink from the printhead
or entire print system (Moving or Shipping functions in the QL-120 Maintenance Utility).
•
Before you move the printer to another location in the same building, disconnect the
power cord and make sure that all other cables are disconnected.
•
The printer weighs about 53 pounds (24 kilograms). Two persons are required to lift the
printer. Two persons standing at the front and back of the printer respectively must lift the
printer by holding it with their hands under the bottom handles (two at the front, one at
the left, and one at the right). Attempting to lift the printer in an improper position can
result in the printer falling or injury.
•
Always hold the printer level and carry it slowly. If ink is spilled inside the printer while
moving it, this could cause a fire or serious electrical shock or damage the printer.
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
