Getting Started
QL-120 User Guide
23
10.
Mount the printhead in the printer. Ensure the metal alignment pins on the printhead
insert into the corresponding alignment slots in the printer. Push the printhead in until it
stops moving.
If printhead is insufficiently inserted, the lower printhead release lever cannot be closed.
To confirm printhead is in the correct position, see if the end of printhead grip and the
edge of the inner metal plate are in the same plane as shown in the figure.
11.
Mount the blade cleaner in the printer. The blade cleaner (B) rests on the alignment slots
used by the printhead (A).
Summary of Contents for QuickLabel Kiaro! QL-120
Page 1: ...U S E R G U I D E...
