manualshive.com logo in svg

ashtech Reliance FS/2, Operation Manual

The Ashtech Reliance FS/2 is a top-of-the-line GPS receiver designed for precision surveying applications. Ensure optimal performance with the comprehensive Operation Manual available for free download from our website. Maximize the potential of your equipment and ensure accuracy with the detailed instructions provided in the manual.

Share
Download
background image

 viii

Reliance with FS/2 Field Operations Manual

Pausing Nested Lines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42

Entering Offset Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42

Manually Entering Offset Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
Input from a LRF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  43

Setting the Communications Parameters for the LRF  . . . . . . . . . . . .  43
Logging Using LRF  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44

External Sensor Devices  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44

Setting External Sensor Parameters  . . . . . . . . . . . . . . . . . . . . . . . . . .  44
Logging Using Sensor Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47

Waypoint Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48
RTCM Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
Automatic Area Calculation - RTCM Remote Mode Only. . . . . . . . . . . . . . . .  54
Local Coordinate Transformation (Grid-to-Grid) . . . . . . . . . . . . . . . . . . . . . . .  60
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  63

Chapter 4. Reference  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  65
FAMLog Screen (MAIN)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
Information Screen (INFO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
Receiver Battery Management Screen (BATT)  . . . . . . . . . . . . . . . . . . . . . . . .  72
Position Screen (POSN)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  73
Satellite Constellation Screen (SATS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  75
Session Setup Screen (SETP)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  77
Feature File Selection Screen (FDF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78
Waypoint File Selection Screen (WPT)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  79
GIS Main Menu Screen (GIS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80
DataLogging Setup Screen (LGST). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  81
Feature Selection Screen (FEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  82
Multi Point Screen (BEGM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  84
Attributes Screen (LOG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  85
Offset Screen (OFST)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  87
LRF Communication Parameters Screen (LCOM) . . . . . . . . . . . . . . . . . . . . . .  89
Sensor Status Screens (SENS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  90
Sensor Type Screen (TYPE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  92
Sensor Setup Screen (SSET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  93
Sensor Data Filter Screen (FLTR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  94
Receiver Setup Screen (RCVR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  96
Satellite Selection Screen (SSEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  98
Differential Mode Status Screens (MODE). . . . . . . . . . . . . . . . . . . . . . . . . . . .  99
RTCM Rover Station Screen (ROVR)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  102
RTCM Base Station Setup Screen (BASE) . . . . . . . . . . . . . . . . . . . . . . . . . . .  104
Base Station Coordinates Screen (COOR)  . . . . . . . . . . . . . . . . . . . . . . . . . . .  106
Receiver File Management Screen (FILE)  . . . . . . . . . . . . . . . . . . . . . . . . . . .  108

Summary of Contents for Reliance FS/2



























































































































































































Reviews:

No comments

Related manuals for Reliance FS/2

zipwake S Series Troubleshooting Manual preview
S Series
Brand: zipwake Pages: 12
Watts 7 Series Installation, Maintenance & Repair preview
7 Series
Brand: Watts Pages: 2
jbc UCR Instruction Manual preview
UCR
Brand: jbc Pages: 12
GE RSTi-EP User Manual preview
RSTi-EP
Brand: GE Pages: 425
Cabletron Systems SmartSwitch 6000 Installation & User Manual preview
SmartSwitch 6000
Brand: Cabletron Systems Pages: 76
National Instruments 9853 Getting Started Manual preview
9853
Brand: National Instruments Pages: 29
Hach sc200 Software Update preview
sc200
Brand: Hach Pages: 2
Hach ORBISPHERE 410 Quick Operator'S Manual preview
ORBISPHERE 410
Brand: Hach Pages: 12
Hach AS950 AWRS Basic Operations preview
AS950 AWRS
Brand: Hach Pages: 472
Hach sc1000 User Manual preview
sc1000
Brand: Hach Pages: 64
V2 ELETTRONICA CL1 Quick Start Manual preview
CL1
Brand: V2 ELETTRONICA Pages: 6
Hach SC4500 Basic User Manual preview
SC4500
Brand: Hach Pages: 210
Habegger AL-A 64 kN Operating Instruction preview
AL-A 64 kN
Brand: Habegger Pages: 2
Hans Grohe iBox Hub 25020180 Assembly Instruction And Instructions For Use preview
iBox Hub 25020180
Brand: Hans Grohe Pages: 36
York MILLENNIUM Manual preview
MILLENNIUM
Brand: York Pages: 20
Samson FOUNDATION 3730-5 Mounting And Operating Instructions preview
FOUNDATION 3730-5
Brand: Samson Pages: 132
Samson 3767 Mounting And Operating Instructions preview
3767
Brand: Samson Pages: 68
Samson 3730-2 Mounting And Operating Instructions preview
3730-2
Brand: Samson Pages: 128

Brands by name

Popular brands

Load more brands