ashtech Reliance FS/2 Operation Manual Download Page 96

Page: 96 / 186

Reliance with FS/2 Field Operations Manual

GIS Main Menu Screen (GIS)

Use the GIS MAIN MENU, Figure 4.10, to log features, navigate to waypoint, set
logging parameters, and set display parameters (grid system, units).

Table 4.10 describes the GIS MAIN MENU fields.

Figure 4.10: GIS Main Menu (GIS)

Table 4.10: GIS Main Menu Field Descriptions

Field

Description

SESSION NAME

Current session name.

FEATURE FILE

Current feature file name.

WAYPOINT FILE

Current waypoint file name.

RIGHT PANE

Number of points in the waypoint file.

WYPT

Opens the WAYPOINT NAVIGATION screen.

FEAT

Opens the FEATURE LOGGING screen.

LGST

Opens the DATALOGGER SETUP screen.

RETN

Returns to the FAMlog screen.

DSST

Opens the DISPLAY SETUP screen.

RCVR

Opens the RECEIVER screen.

Summary of Contents for Reliance FS/2



























































































































































































Search results

Summary of Contents for Reliance FS/2

Reviews:

Related manuals for Reliance FS/2

Brands by name

Popular brands

ashtech Reliance FS/2, Operation Manual

Search results

Summary of Contents for Reliance FS/2

Reviews:

Related manuals for Reliance FS/2

Brands by name

Popular brands