ashtech Reliance FS/2, Operation Manual

Page: 120 / 186

104 Reliance with FS/2 Field Operations Manual
RTCM Base Station Setup Screen (BASE)
Use the RTCM BASE STATION screen (Figure 4.29) to set parameters for the
RTCM base station.
Table 4.24 describes the RTCM BASE STATION screen fields.
Figure 4.29: RTCM Base Station Screen (BASE)
Table 4.24: RTCM Base Station Setup Screen Field Descriptions
Field Description
BASE STATION ID Enter four character ID for base station. Valid values are 0-1023. Default
is 0. ID is sent out with differential corrections from base station.
If receiver operates as a remote station and this value is zero, the receiver
accepts differential corrections from any base station. If receiver
operates as a remote station and this value is not zero, the receiver
accepts differential corrections only from base station with the same ID
number.
RADIO OUTPUT Remote station only. Port for collecting of differential corrections.
Values include: PORT A, PORT B, and PORT C. Default: PORT B.
BAUD RATE Communication rate between receiver and RTCM radio. Values include:
300, 600, 1200, 2400, 4800, 9600, 19200 and 38400. Default: 9600
RTCM BIT RATE Base station only. Speed of RTCM messages. Values include: 25, 50,
100, 110, 150, 200, 250, 300 and 1500. Default is 300.
COOR Opens the Base Station Coordinates screen.
CNCL Returns to DIFFERENTIAL MODE screen disregarding any changes.