Field Operation
33
F
ie
ld
O
p
erat
ion
6.
Highlight a waypoint file and press OK.
7.
Press OK once more to return to the FAMlog screen, which displays the
current session name.
You may encounter some error messages when the receiver is first turned on, such as “Old
coordinates. Not enough satellites.” Refer to Appendix E,
, if the error
messages continue for more than a few minutes.
Setting Session Parameters
In addition to setting the session name and selecting feature and waypoint files for a
session, you also need to set the antenna height, recording interval, time on point,
PDOP mask, and elevation mask.
1.
From the FAMlog screen, press F3 (GIS) to call the GIS Main menu.
2.
Press F3 (LGST) to call the Datalogging Setup screen, Figure 3.10.
3.
Enter the recording interval and set the time on point, and press F4 (OK) to
accept the changes and return to the GIS Main Menu.
Figure 3.10: Datalogging Setup Screen
Summary of Contents for Reliance FS/2
