ashtech Reliance FS/2, Operation Manual

Page: 163 / 186

Basic FS/2 Operation C-5
Basi
c F
S
/2
O
p
erat
io
n
5. Always clean or dry the screen with a soft cloth.
Downloading Data
After you have completed the session, you must download the receiver data to a PC
for viewing, filtering, post-processing, and exporting. These procedures are described
in the Reliance Processor Office User’s Guide.
Uploading New Feature and Waypoint Files
Uploading files from the PC to the FS/2 requires a data connection between the PC
and the FS/2:
1. Exit FAMlog on the FS/2.
2. Disconnect the FS/2 from the GPS receiver.
3. Connect the FS/2 to the PC COM port.
4. At the FS/2 DOS prompt C>, type
HCOM
.
The FS/2 is now ready to receive file transfers.
You may upload feature and waypoint files directly from the Reliance PC program. Refer to the
Reliance Processor Office User’s Guide for a detailed explanation of this operation.
FS/2 Battery Management
Replacing Batteries
To replace batteries in the FS/2:
1. Turn the FS/2 off.
2. Remove the battery cap using a coin.
CAUTION
Do not use organic or harsh detergents, as they may damage the case.
CAUTION
Do not allow moisture into the battery compartment.