ashtech Reliance FS/2, Operation Manual

Page: 116 / 186

100 Reliance with FS/2 Field Operations Manual
Table 4.22 describes the DIFFERENTIAL MODE screens fields.
Figure 4.27: Differential Mode Screen (MODE) - Base
Table 4.22: Differential Mode Screen Field Descriptions
Field Description
RECEIVER MODE Mode of operation: AUTONOMOUS, REMOTE , or BASE.
BASE STATION ID Four characters used to identify the base station. If the receiver
operates as a base station, this ID is sent out along with differential
corrections. If the receiver operates as a remote station and this value
equals zero, the receiver accepts differential corrections from any
base station. If the receiver operates as a remote station and this value
is not zero, the receiver accepts differential corrections only from
base station with the ID.
RADIO INPUT Remote station only. Port for collecting of differential corrections.
Values include: PORT A, PORT B, and PORT C.
RADIO OUTPUT Base station only. Port for output of differential corrections. Values
include PORT A, PORT B, and PORT C.
BAUD RATE Communication rate between receiver and RTCM radio. Values
include: 300, 600, 1200, 2400, 4800, 9600, 19200 and 38400.
MAXIMUM AGE Remote station only. Maximum age of a correction to use for
correction. Possible values are 0—999 seconds.
RTCM BIT RATE Base station only. Speed of RTCM messages. Values include: 25, 50,
100, 110, 150, 200, 250, 300 and 1500.
AUTO Set the receiver to autonomous mode.