ashtech Reliance FS/2, Operation Manual

Page: 57 / 186

Field Operation 41
F
ie
ld
O
p
erat
ion
Feature Pause
The Pause function temporary stops logging a feature to log a new feature. This saves
field time in that an operative need only travel a route once, and not have to double
back. For example, you can use the Pause function if you are logging a road, and need
to map several signs or bridges along the road.
1. When logging an area or line, press the F3 (PAUS) to pause the feature data
logging.
2. Press F2 (FEAT) to log a new feature.
The Feature Selection screen appears (Figure 3.18).
Only point and line features are listed when an area feature is paused. FAMlog does not
simultaneously log two features of the same type.
3. Move to the new feature to log.
4. Use the up/down arrows to highlight the feature you want to annotate, and
press F4 (LOG).
An attribute menu appears listing attributes to assign to the feature.
Figure 3.18: Feature Selection Screen