ashtech Reliance FS/2, Operation Manual

Page: 168 / 186

C-10 Reliance with FS/2 Field Operations Manual
When you have set the parameters to the desired values,
1. Press the YES key to save the changes,
2. Press ESC twice.
The FS/2 returns to the DOS prompt.
Charging Batteries
Charging is recommended before each working shift by means of an FS/2 AC
adapter:
1. Turn the FS/2 off.
2. Connect the AC adapter to Port 3 (see Figure C.1).
3. Plug the AC adapter into the AC supply.
4. Turn on the AC supply.
5. Let the batteries charge, preferably for 8 hours.
6. Turn off or disconnect from the AC supply.
CAUTION
Under certain conditions, particularly low battery charge, the FS/2 comes on
for a couple of seconds, then turns itself off. If you find that you are unable to
get the FS/2 to stay on, increase the POWER REMAINING value so that it is
greater than the LOW POWER WARNING ONSET. Replace the batteries if
alkaline, or charge the batteries if NiCad.
CAUTION
DO NOT ATTEMPT TO RECHARGE NON-RECHARGEABLE
BATTERIES. Verify that rechargeable batteries are fitted to your FS/2, and
are oriented correctly. Use only the FS/2 AC adapter.