ashtech Reliance FS/2, Operation Manual

Page: 58 / 186

42 Reliance with FS/2 Field Operations Manual
5. Enter or select the requested attribute information using the key pad and
press F4 (OK).
The Paused Logging screen indicates the attributes just entered, and that the
new feature is logged (Figure 3.19).
6. Press F4 (DONE) to the Feature Attribute screen of the paused feature.
7. Return to the last position logged of the paused feature.
8. Press F3 (CONT) to resume the paused feature.
Pausing Nested Lines
If a line is nested in an area and the F3 (PAUS) key is pressed, both the line and the
area are paused to log a point. After logging a point, the line and area logging
continue simultaneously when F3 (CONT) is pressed.
Entering Offset Data
Physically inaccessible point features can still be accurately logged. Examples of
inaccessible features include manholes on busy roadways or points under bridges.
The offset distance and azimuth must be measured and entered, whether measured
manually or with a Laser Range Finder (LRF).
Manually Entering Offset Data
Log these features as offset point features by pressing F3 (OFST) key while entering
the attributes for the point feature. (see Figure 3.21, “Feature Offset Screen” on
Figure 3.19: Paused Logging Screen