manualshive.com logo in svg

ashtech Reliance FS/2, Operation Manual

Share
Download
ashtech Reliance FS/2 Operation Manual Download Page 97

Reference 

81

Ref

eren
ce

DataLogging Setup Screen (LGST)

Use the DATALOGGING screen, Figure 4.11,  to set the recording interval and 
recording time for a point. 

Table 4.11 describes the DATALOGGING screen fields.

 Figure 4.11: Datalogging Setup Screen (LGST)

 Table 4.11: Datalogging Setup Screen Field Descriptions

Field

Description

INTERVAL

Recording interval used for point, line, and area feature data 
collection. Changing the recording interval creates  a new file in the 
receiver. Default: 2.0 seconds.

TIME ON POINT

Point occupation time . Period of logging for a point feature. The 
maximum time on point is 999 epochs or 60 minutes, whichever is 
smaller.  Default is  0.33 minute.

DFLT

Reverts to default interval and time on  point time values. 

CNCL

Returns to GIS MAIN MENU disregarding any changes.

OK

Returns to GIS MAIN MENU accepting the current settings.

Summary of Contents for Reliance FS/2



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands