ashtech Reliance FS/2, Operation Manual

Page: 110 / 186

94 Reliance with FS/2 Field Operations Manual
Sensor Data Filter Screen (FLTR)
Use the SENSOR DATA FILTER screen, Figure 4.22, to set parameters for filtering
data from the external sensor device.
Table 4.19 describes the SENSOR DATA FILTER screen fields.
Figure 4.22: Sensor Data Filter Screen (FLTR)
Table 4.20: Sensor Data Filter Screen Field Descriptions
Field Description
IN POINT Select to store filtered data from external sensor device for every logged point
feature (ALL), when requested (ON DEMAND), or at a given frequency in
seconds. External sensor data quickly fills the receiver memory.
I N LINE/AREA Select to store filtered data from external sensor device for every logged line or area
feature (ALL), when requested (ON DEMAND), or at a given frequency in
seconds. External sensor data quickly fills the receiver memory.
BETWEEN
FEATURES Select to store filtered data from external sensor device in between every logged
feature (ALL), when requested (ON DEMAND), or at a given frequency in
seconds. External sensor data quickly fills the receiver memory.
PREFIX Filter prefix. Optional.
SUFFIX Filter suffix. Optional.
MAX BYTES Maximum number of bytes to store. Set it to zero, to store all filtered data.
FIELD # If sensor output consists of fields separated by commas, set the field number of
interest. Set it to zero for no preference