Asentria SiteBoss 530, User Manual

Page: 28 / 140

Asentria SiteBoss 530 User Manual
22
Email Settings
SiteBoss 530 - Email Settings
A) SMTP Server Hostname/IP Address []
B) Email Domain Name [ASENTRIA.COM]
C) Authentication (LOGIN) [OFF]
SMTP Server Hostname / IP Address
sets the hostname or IP address of the outbound mail server. (Max
length 64 chars)
Email Domain Name
sets the @
domain_name.com
to use when the S530 sends an Email. Default setting is
“ASENTRIA.COM”. (Max length 48 chars)
Authentication (LOGIN)
displays a menu to configure the credentials that may be required by your server for
SMTP authentication. Some SMTP servers require an authentication to relay Emails. Default setting is OFF.
SiteBoss 530 - Email Authentication Settings
A) Authentication Enabled [OFF]
B) Username []
C) Password [********]
Authentication Enabled
is an ON/OFF toggle to enable Email authentication. Default setting is OFF.
Username / Password
defines the login credentials. (Max length for each is 48 chars)
Real-Time Socket Settings
SiteBoss 530 - Real-Time Socket Setup
A) FILE1
B) FILE2
C) EVENTS
Enter your Selection: a
SiteBoss 530 - FILE1 Real-Time Data Socket Setup
A) Real-Time Socket Mode [LISTEN]
B) Show Answer String on Connection [ON]
C) Require Xon to Start Data Flow [OFF]
D) Idle Connection Close Timer [0]
E) Close Socket When File Empty [OFF]
F) Real-Time Socket Push Hostname/IP []
G) Real-Time Socket Push Port Number [3000]
H) Real-Time Socket Push Retry Timer [5]
Real-Time Socket Mode
toggles between LISTEN, PUSH, and OFF. When set to LISTEN this functions like
traditional real-time sockets on TCP port 2201. When set to PUSH the unit tries to make a TCP connection on the
TCP port specified in G) Real-Time Socket Push Port Number. As long as a connection exists, the unit sends all
data in the specified file on the connection as data become available. Default setting is LISTEN.
Show Answer String on Connection
is an ON/OFF toggle to enable the prompt indicating successful
connection to the Real-Time Socket (RTS) port. Default setting is ON.
Require Xon to Start Data Flow
is an ON/OFF toggle to enable the Xon/Xoff data flow control requirement.
Default setting is OFF.
Idle Connection Close Timer
sets the number of seconds (0 – 255) to wait before disconnecting an idle
connection. A setting of 0 means the connection will never automatically close. Default setting is 0.