Asentria SiteBoss 530, User Manual

Page: 19 / 140

Asentria SiteBoss 530 User Manual
13
Alarm actions (action list)
Alarm actions have their own unique method of entry. Refer to the
Action List section in the Features chapter for
more information.
Option list
The option list type is similar to the toggle type in that it has a list of options to choose from:
SiteBoss 530 - Serial Port 2 Baud Rate
A) 300
B) 600
C) 1200
D) 2400
E) 4800
F) 9600
G) 19200
H) 38400
I) 57600
J) 115200
After selecting an option, you are immediately returned to the previous menu. The new value will be displayed to
the right of the setting name, letter, or number.
Web Interface
The S530 has a built-in HTTP web server that can be used to configure the unit from anywhere the unit can be
accessed on the network or Internet. Once you have enabled it through the network section of the setup menu,
simply connect to
http://<IP address of S530>
or
https://<IP address of S530>
to use Secure Sockets Layer
(SSL). See Web Interface Settings menu for further description.
Upon connection, you will be greeted by a login screen. Log in with your Login ID (Username) and Password.
These are the same credentials you would use to log into the command prompt. Once logged in, the General
Status screen will be displayed, with a menu bar across the top of the page that displays the same menu options
as the command prompt menu system. From here, you can alter any setting in the same way you could via the
prompt.
Main Setup Menu
SiteBoss 530 - Main Setup Menu
A) Network Settings
B) Serial Settings
C) Modem Settings
D) Security Settings
E) Alarm/Event Definitions
F) Action Definitions
G) General Settings
H) Event Log Settings
I) Audit Log Settings
Network Settings
contains settings for network communication, SNMP, FTP, PPP, Email, and more.
Serial Settings
contains settings pertaining to the function of each serial port.
Modem Settings
contains modem init settings and modem-specific security options.
Security Settings
contains all user profiles, RADIUS configuration, and general security settings.
Alarm/Event Definitions
contains all of the settings that define events within the S530.