Asentria SiteBoss 530 Page 36 User Manual Download | Manualshive

Page: 36 / 140

background image

Asentria SiteBoss 530 User Manual

30

The S530 has the ability to monitor incoming serial data for multi-line records (individual records that are broken
into multiple lines with carriage returns). If the records are separated by a specific number of blank lines, this
basic configuration menu will suffice. If a more complex delineation scheme is used, enable Complex Multiline
Detection.

Multiline Record Enable

is an ON/OFF toggle to enable multiline record detection. Default setting is OFF.

Blank Line Count

sets the number of blank lines that must come between records. Default setting is 0.

Complex Multiline Detection

displays settings for detecting complex multiline records. Default setting is OFF.

SiteBoss 530 - Serial Port 1 Complex Multiline Record Settings
A) Complex Multiline Record Enable [OFF]
B) Start Field 1 Character Position [0]
C) Start Field 1 Text []
D) Start Field 2 Character Position [0]
E) Start Field 2 Text []
F) Collect Lines Before Start Record [0]
G) End Detection [FORMULA]
H) Line Count [0]
I) End Field 1 Character Position [0]
J) End Field 1 Text []
K) End Field 2 Character Position [0]
L) End Field 2 Text []

Complex Multiline Record Enable

is an ON/OFF toggle to enable advanced multiline detection. Default setting

is OFF.

Start Field n Character Position

sets the character position used to define the beginning of the multiline field.

This option is used with "Count" method record end detection.

Start Field n Text

sets the text used to determine the beginning of the multiline field. This option is used with

"Formula" method record end detection.

Collect Lines Before Start Record

sets the number of blank lines that are between each record.

End Detection

toggles between FORMULA, COUNT, and BLANKS to set the method of detecting the end of

each record. Default setting is FORMULA.

Line Count

is the number of lines to meter each record at. This option is used with "BLANKS" record end

detection.

End Field n Text/Character Position

is the counterpart to start the text or character position option. This option

sets the end delimiter for multiline records.

«
...
34
35
36
37
38
...
»

Summary of Contents for SiteBoss 530













































































































































Reviews:

No comments

Related manuals for SiteBoss 530

Brand: S-COM Pages: 400

Brand: GARAN Pages: 8

Brand: Gamma Vacuum Pages: 25

Brand: Gamma Pages: 28

MusicCAST MCX-CA15

Brand: Yamaha Pages: 176

Extra Free RZB-02

Brand: Zamel Pages: 2

Brand: Yamaha Pages: 2

Brand: ZPA Pecky, a.s. Pages: 36

Brand: EVERSPRING Pages: 3

Brand: elsner elektronik Pages: 2

769N FireLock NXT Series

Brand: Victaulic Pages: 40

Brand: Rain Bird Pages: 11

LOOPDRIVE FIM-RC

Brand: 4EVAC Pages: 2

Serial Interface Module

Brand: Federal Signal Corporation Pages: 12

Brand: GCE Pages: 13

Brand: Leviton Pages: 2

Brand: TECH Pages: 20

Brand: Hakko Electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands