Asentria SiteBoss 530, User Manual

Page: 92 / 140

Asentria SiteBoss 530 User Manual
86
Access
Asentria-Port3-PT-
Access
DENY, ALLOW sec.user[x].port[3].ptaccess TMLWP
Asentria-Port4-PT-
Access
DENY, ALLOW sec.user[x].port[4].ptaccess TMLWP
Asentria-Port5-PT-
Access
DENY, ALLOW sec.user[x].port[5].ptaccess TMLWP
Asentria-Port6-PT-
Access
DENY, ALLOW sec.user[x].port[6].ptaccess TMLWP
Asentria-Port7-PT-
Access
DENY, ALLOW sec.user[x].port[7].ptaccess TMLWP
Asentria-Port8-PT-
Access
DENY, ALLOW
sec.user[x].port[8].ptaccess
TMLWP
Asentria-Port9-PT-
Access
DENY, ALLOW sec.user[x].port[9].ptaccess TMLWP
Asentria-Port10-PT-
Access
DENY, ALLOW sec.user[x].port[10].ptaccess TMLWP
Asentria-Port11-PT-
Access
DENY, ALLOW sec.user[x].port[11].ptaccess TMLWP
Asentria-Port12-PT-
Access
DENY, ALLOW sec.user[x].port[12].ptaccess TMLWP
Asentria-Port13-PT-
Access
DENY, ALLOW sec.user[x].port[13].ptaccess TMLWP
Asentria-Port14-PT-
Access
DENY, ALLOW sec.user[x].port[14].ptaccess TMLWP
Asentria-Port15-PT-
Access
DENY, ALLOW sec.user[x].port[15].ptaccess TMLWP
Asentria-Port16-PT-
Access
DENY, ALLOW sec.user[x].port[16].ptaccess TMLWP
Asentria-Service-
Type LOCAL, MODEM, TELNET, PASSTHROUGH,
FTP, RTS, WEB, PPP, SSH
N/A N/A
The final column, "Required by connection method", lists the connection methods that require the attribute. Here is
what the letters mean for this column:
•
F
=FTP
•
T
=Telnet command processor
•
M
=Modem command processor
•
L
=Local (console) command processor
•
W
=Web UI
•
R
=Real time sockets
•
P
=Telnet pass-through (to port 210x)
For example, Asentria-Access-File has "TML", which means if you configure a user on the RADIUS server that you
intend to connect by Telnet, Modem, or Local, then you
must
configure this attribute to be returned to the unit upon
successful authentication, otherwise the unit cannot authorize the user, and will therefore reject the user's login even
though they are authentic.
The Asentria-Service-Type attribute is N/A for the last two columns because it does not deal with authorization -- it is
used in accounting RADIUS transactions only.