Asentria SiteBoss 530 User Manual Download | Manualshive

Page: 25 / 140

background image

Asentria SiteBoss 530 User Manual

19

SiteBoss 530 - FTP File Names
A) Include Date in Filename [OFF]
B) Include Time in Filename [OFF]
C) Include Sequence #s in Filename [OFF]
D) Data File 1 [FILE1]
E) Data File 2 [FILE2]
F) Events File [EVENTS]

Include Date / Time in Filename

is an ON/OFF toggle to enable the addition of the file transfer date and/or time

to the beginning of the name of each transferred file of data. Default setting is OFF.

Include Sequence #s in Filename

is an ON/OFF toggle to enable the addition of a unique sequence number to

the beginning of the name of each transferred file of data. This ensures that no two transfers will have the same
file name. Default setting is OFF.

Data File n / Events File

are text-entry fields where the name each data file will have on the remote server (not

including any date, time, or sequence numbers) can be configured.

Once FTP Push has been configured, entering the

PUSHTEST

command will test the connectivity to the FTP

server and write a “log in” and “log out” entry to the Status File in the directory you configured. No data is pushed
with this command. Connection data displayed on the terminal screen is useful if the connection fails.

An immediate push of data can be done using the

PUSHNOW

command.

PPP Settings

SiteBoss 530 - PPP Settings
A) PPP Dialout Settings
B) PPP Hosting Settings
C) IP Routing
D) Route Test Settings

PPP Dialout Settings

displays settings pertaining to making outbound PPP network connections.

PPP Hosting Settings

displays settings for hosting a PPP connection.

displays settings for routing of IP packets between PPP connections and the LAN an S530 is

connected to.

Route Test Settings

displays settings for network monitoring/PPP backup connection settings. This menu allows

you to configure up to three IP addresses to ping on a regular basis. If any of the IPs are down, the unit will fall
back to a PPP dialout in order to maintain reliable network connectivity for sending SNMP traps.

PPP Dialout Settings

SiteBoss 530 - PPP Dialout Settings
A) PPP Dialout Enabled [OFF]
B) Telephone Number []
C) User Name []
D) Password [********]
E) Idle Connection Disconnect (sec) [60]
F) Maximum Retries [3]
G) Carrier Detect Timeout (sec) [60]
H) Login Sequence Timeout (sec) [30]
I) Dialout Modem Init String []
J) IP Address to Suggest [0.0.0.0]

«
...
23
24
25
26
27
...
»

Summary of Contents for SiteBoss 530













































































































































Reviews:

No comments

Related manuals for SiteBoss 530

FPBA-01 PROFIBUS DP

Brand: ABB Pages: 2

ControlMaster CM15

Brand: ABB Pages: 4

Brand: Samsung Pages: 32

ACTIVE DRIVER M/M 1.1

Brand: DAB Pages: 10

Brand: d&b audiotechnik Pages: 3

ACTIVE DRIVER M/M 1.1

Brand: DAB PUMPS Pages: 38

EtherNetIP ControlPlex CPC12EN

Brand: E-T-A Pages: 28

Brand: IDK Pages: 96

Brand: TCS Pages: 16

Brand: IBA Pages: 29

Brand: Ezodo Pages: 7

Brand: Viva Pages: 9

Brand: e-survey Pages: 12

VENMAR ADVANCED TOUCHSCREEN CONTROL

Brand: vanEE Pages: 4

Brand: GOAL ZERO Pages: 52

Brand: CAME Pages: 128

Brand: Dantherm Pages: 36

Brand: Eaton Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands