background image

Asentria SiteBoss 530 User Manual 

  

100

  

 
SMS Alarms  

 

 Note: 

SMS Messaging is only supported with an EDGE wireless modem installed in the S530. 

 

SMS alarm messages contain a concatenated alarm string, which follows the format of: 
 

Date Time :: SiteName :: Sensor Pod/Bank name  :: Sensor Point Name :: Alarm Alias 

 
For example, a typical SMS message for a temperature alarm might look like the following: 
 

09/25 15:59 :: San Diego Site #12 :: Sensor Pod 12 :: Cabinet Temp :: Temperature Very High 
 

SMS alarm messaging has the following limitations: 
 

• 

The user cannot specify the order of event message items  

• 

The user CAN specify which items are included in event message using the existing mechanism  

• 

The event class is not included  

• 

If the event message is too large to fit into the allowed SMS message size, it will be broken up into multiple 
SMS messages 

 

Pager Alarms 

 

 Note: 

requires dial-up modem 

 
Pager alarm messages contain a concatenated alarm string, which follows the format of: 
 

Date Time :: SiteName :: Sensor Pod/Bank name  :: Sensor Point Name :: Alarm Alias 

 
For example, a typical Pager notification for a temperature alarm might look like the following: 
 

09/25 15:59 :: San Diego Site #12 :: Sensor Pod 12 :: Cabinet Temp :: Temperature Very High 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SiteBoss 530













































































































































Reviews: