Asentria SiteBoss 530 User Manual
120
Status Commands
?W
or
STATUSW
commands display the current status of the wireless connection. (Note that
?WIRE
or
?WIRELESS
or
STATUS WIRELESS
are also valid commands.) The unit will respond with: Wireless modem
status: <state>
Possible states are:
:not installed
wireless card not detected
:not enabled
net.wireless.mode=OFF
:connecting
attempting to establish connection *
:connected
connection established, no active TCP session
:active
connection established, one or more active TCP sessions
:idle
which it may be for only a moment between sessions
* if it says “Connecting” most of the time, there is a problem and it would be advisable to contact
to check the wireless modem log.
?W INFO
will display Network Registration and Subscriber & Equipment information similar to the following:
?w info
Wireless Modem Information:
Network Registration:
Registration Status : Registered to home network
Location Area Code : 0xCB52 (52050)
Cell ID : 0xCC89 (52361)
Signal Strength : 5 of 5 bars (0:00:06 ago)
Subscriber and Equipment:
IMSI : 310410169697053
Phone Number : 12069137572
Local IP Address : 166.130.3.202
Manufacturer ID : SIEMENS
Model ID : MC75
IMEI : 010644000067887
Revision ID : REVISION 03.010
Network Name : Cingular
(E)GPRS Status : EGPRS attached
Current Band : 850/1900 MHz
Mobile Channel : 0135
Mobile Country Code : 310
Mobile Network Code : 410
PLMN Color : 3
Base Station Color : 7
Max Power RACH : 0
Min Rx Level : -111
Base Coefficient : 52
SIM Status : SIM inserted
ICCID : 89014103211696970536
Troubleshooting Commands
?W LOG
or
STATUSW LOG
commands will display the wireless log. (Note that
?WIRE LOG
or
?WIRELESS
LOG
or
STATUS WIRELESS LOG
are also valid commands. The word “log” must be preceded by a space.)
Contact
if troubleshooting is required as the log data probably will not be useful to the
user.
Summary of Contents for SiteBoss 530
Page 6: ......
